FM-130 Weighing Indicator

Categories: ,

Description

. Large LCD (digit height 25mm) display with LED backlight

. Both quick weighing mode and simple counting (pcs) mode available
. Auto zero tracking; Adjustable gravity value
. Net/Gross indication; Hold function; Low power indication and auto power off
. Environmental filter setting for better performance
. Available in connecting with one 350-ohm load cel

Operating Temperature
  • 0°C ~ 40°C (32°F ~ 104°F)
Power Source
  • Adaptor DC 9V or Ni-MH rechargeable battery set(Optional)
Dimensions
  • 225 (W) × 134.5 (H) × 60 (D)mm
Display
  • LCD 5 1/2 Digits; 25.4mm (Height); LED backlight

 

Reminder of Battery Use :
New batteries or batteries that have been stored for a long time may require a longer initial charge time. The red LED will be ON only after charging for over 30 minutes, if the battery voltage is below 2.5 V. Suggest to have a full charge for at least 8 hours before operation.

Notes about charging the NiMH (Nickel-Metal Hydride) battery for FM-130:

Status LED Description
1. Ready to charge Once the scale is connected with AC power mains, the green and
red LEDs will be inter-flashing for 3 seconds as a self-diagnosis.
2. During charging The red LED will be ON.
3. Finish charging The green LED will be ON.
4. Battery fault The green and red LEDs keep inter-flashing without stop.
5. Without battery The red LED will be ON.

Reviews

There are no reviews yet.

Be the first to review “FM-130 Weighing Indicator”

Your email address will not be published. Required fields are marked *

clear formPost comment